BAL 118 WS-70

Alkyd Resins, long oil, Architectural paints and coatings

BAL 118 WS-70

Long oil Alkyd Resin

Based on Soybean Oil Fatty Acid 70% in white spirit

Product Description:

BAL 118 WS-70 is a long oil alkyd resin based on soybean oil fatty acid which offers very good surface and deep drying, gloss and gloss retention and adhesion and good coverage.

Characteristics and Advantages:

Very good surface and deep drying
Very good gloss and gloss retention
Very good adhesion
Very good solvent tolerance
Good coverage
Outstanding filler binding power

Uses:

Architectural paints and coatings
Gloss and semi gloss paints

Technical Properties:

Physical data in liquid state at 25°C

These data are measured for each lot by our QC lab before its release.

Properties

Unit

Value

Test method

Oil content (approx.)

wt %

Calculation

Color

Gardner

Max 5

ASTM D1544

Viscosity (at 25°C)

1000-3000

ASTM D1545

Acid number

mg KOH/g

Max 10

ASTM D1639

Solid content

wt %

70±1

ASTM D1259

Typical Properties

These data are not subject to routine monitoring or part of the specifications; they are only reported for a better product description.

Properties

Unit

Value

Test method

Density (at 23°C)

g/cm³

0.9642

ASTM D1475

Flash point (open cup)

℃

ASTM D92

Dilutability (Internal test method)

White Spirit

◈

Butyl Acetate

▩

Xylene

▩

Acetone

▩

Toluene

▩

Butanol

◈

Ethyl Acetate

▩

▩ = _{unlimited dilutability}

◉ = _{substantial dilutability}

◈ = _{limited dilutability}

◯ = _{very limited or no diliutability}

Compatibility (ASTM D688 @T=160°C)

Aliphatic Polyisocyanate

Incompatible

Long Oil Alkyds

Compatible

Medium Oil Alkyds

compatible

Amino Resin

Incompatible

Short Oil Alkyds

Incompatible

Hydroxyl Acrylic Resin

Incompatible

Product safety and Environmental protection:

The usual protective measures employed during the handling of Alkyd Resins should be observed. Further product safety information can be obtained from our Material Safety Data Sheet which is available on request.

Packaging: 190 kg (net) in steel drums.

Storage: Store in a cool place below 25 °C and away from moisture and direct sunlight.

Disclaimer: The information and in particular the recommendations relating to the application and use of Bonyan Kala Chemie products are given in good faith based on our current knowledge and expertise of the products when properly stored, handled and used under normal conditions within their shelf life. In practice, the differences in materials, chemistries and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any recommendations, or from any other advice offered. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users should always refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request or can be accessed from www.bonyankala.com.