BMA 401 T-70
Maleic Resin
Product Description:
BMA 401 T-70 is a Maleic Resin which offers excellent gloss and gloss retention and hardness and very good surface and deep drying properties
Characteristics and Advantages:
Uses:
Technical Properties:
Physical data in liquid state at 25°C
These data are measured for each lot by our QC lab before its release.
Properties
Unit
Value
Test method
Solvent
—
Toluene
—
Color
Gardner
Max 10
ASTM D1544
Viscosity (at 25°C)
mPa.s (cP)
40-60
ASTM D1545
Acid number
mg KOH/g
Max 35
ASTM D1639
Solid content
wt %
70±1
ASTM D1259
Typical Properties
These data are not subject to routine monitoring or part of the specifications; they are only reported for a better product description.
Properties
Unit
Value
Test method
Density (at 23°C)
g/cm³
1.036
ASTM D1475
Flash point (open cup)
℃
5
ASTM D92
Dilutability (Internal test method)
White Spirit
Butyl Acetate
Xylene
Acetone
Toluene
▩ = unlimited dilutability
◉ = substantial dilutability
◈ = limited dilutability
◯ = very limited or no diliutability
Compatibility (ASTM D688 @T=160°C)
Saturated Polyesters
compatible
Long Oil Alkyds
Incompatible
Medium Oil Alkyds
Incompatible
Amino Resin
compatible
Short Oil Alkyds
compatible
Acrylic Resin
compatible
Product safety and Environmental protection:
The usual protective measures employed during the handling of Maleic Resin should be observed. Further product safety information can be obtained from our Material Safety Data Sheet which is available on request.
Packaging: 200 kg (net) in steel drums.
Storage: Store in a cool place below 25 °C and away from moisture and direct sunlight.
Disclaimer: The information and in particular the recommendations relating to the application and use of Bonyan Kala Chemie products are given in good faith based on our current knowledge and expertise of the products when properly stored, handled and used under normal conditions within their shelf life. In practice, the differences in materials, chemistries and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any recommendations, or from any other advice offered. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users should always refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request or can be accessed from www.bonyankala.com.
